Basic Info.
Carbon Content
High-Carbon
Forming Way
Molded Graphite
Crystal Morphology
Aphanitic Graphite
Transport Package
Vacuum Packing in Wooden Case
Specification
High Pure High Density Graphite
Product Description
High Quality Graphite Heating Rod, Combined Heater For High Temperature Vacuum Furnace
Product details:
Graphite heater become the indispensable parts of the high temperature furnace. The weight loss is small and thermal expansion coefficient is very small when burned by ultra-high temperature. The strength of graphite heater will increase with the increasing of temperature.
High Quality Graphite Heating Rod, Combined Heater For High Temperature Vacuum Furnace Features:
1. Thermal stability: according to the use conditions of hot and cold products, special design is made to ensure the reliability of product quality.
2. Erosion resistance: the uniform and fine matrix design delays the erosion degree of the product. Impact resistance: the product can withstand high thermal shock strength, so any process can be assured.
3. Acid resistance: the addition of special materials can significantly improve the quality of products, show excellent performance in acid resistance index, and greatly extend the service life of products.
4. High thermal conductivity: high content of fixed carbon ensures good thermal conductivity, reduces dissolution time and significantly reduces energy consumption.
5.Control of metal pollution: strict control of material composition ensures that the product does not pollute the metal when dissolved.
6. Quality stability: the manufacturing technology and quality assurance system of high pressure forming can more fully guarantee the quality stability.
High Quality Graphite Heating Rod, Combined Heater For High Temperature Vacuum Furnace Appliaction:
High Temperature and Vacuum Furnaces
High Quality Graphite Heating Rod, Combined Heater For High Temperature Vacuum Furnace Materials:
Typical property Data JC-500
Properties | Test standard | Unit | Value |
Average grain size | | μm | 10 |
Bulk density | DIN IEC 60413/203 | g/cm² | 1.77 |
Open porosity | DIN 66133 | Vol.% | 13 |
Medium pore size | DIN 66133 | μm | 1.5 |
Permeability(air at 20ºC) | DIN 66133 | Cm²/s | 0.1 |
Rockwell hardness HR 10/100 | DIN IEC 60413/303 | | 70 |
Specific electrical resistivity | DIN IEC 60413/402 | μΩm | 14 |
Flexural strength | DIN IEC 60413/501 | MPa | 50 |
Compressive strength | DIN 51910 | MPa | 120 |
Young's modulus | DIN 51915 | MPa | 10.5*103 |
Thermal expansion(20-200ºC) | DIN 50909 | k-1(C-1) | 3.9*10-6 |
Thermal conductivity (20ºC) | DIN 51908 | Wm-1k-1 | 80 |
Ash content | DIN 51903 | ppm | ** |
*Value might be changed due to material size
**Ash value according to purity specifications
Typical property Data JC-300properties | Unit | Value |
---|
Bulk density | g/cm3 | 1.79 |
Specific electrical resistivity | μΩ-m | 13 |
Young's modulus | Gpa | 9.8 |
Dielectric strength | Mpa | 39.2 |
Shore hardness | | 56 |
C.T.E | X10-6 | 4.8 |
Conductivity for heat | W/mk | 104 |
*Value might be changed due to material size Typical property data JC-11Properties | Unit | Value |
Bulk density | Mg/m3 | 1.77 |
Shore hardness | shore D | 51 |
Specific electrical resistivity | μΩ-m | 11.0 |
Flexural strength | Mpa | 39 |
Compressive strength | Mpa | 78 |
Tensile strength | Mpa | 25 |
Thermal expansion | 10-6/K | 4.5(350-450ºC) |
Thermal conductivity | W/(m.k) | 120 |
Ash content | mass% | <=0.1 |
*Value might be changed due to material size
Graphite advantages:
Because of the high tempearture resistance, thermal conductivity, corrosion resistance and special thermal shock resistance, graphite is widely used in metallurgy, mechanical, electrial, chemical, textile, denfense and other industries.
1. High strength. As the temperature rises, the graphite strength increases
2. High temperature resistance
3. Good heat shock resistance
4. Anti-oxidation
5. Strong corrosion resistance to acid and alkali liquid
6. Good conductivity and thermal efficiency.
7. Excellent chemical stability
8. High heat conductivity
9. Mechanical shock resistance
10. Small thermal expansion coefficient
Our company is a professional production and export of graphite products enterprises, our company has complete production equipment, complete supporting facilities, strong technical force, product quality, supervisors and workers have more than ten years of experience. Our factory is located in Qingdao. We believe that thanks to our high quality graphite materials and molded graphite parts at very competitive prices, professional services, extensive product knowledge and technical expertise can help you save a lot of resources, improve your efficiency and meet more customer needs.
Address:
Qingdao Road, Shuiji Sub-District Office, Laixi City, Qingdao, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals, Metallurgy, Mineral & Energy
Company Introduction:
Our company is a professional enterprise engaged in the production, processing and sales of graphite products such as graphite mold, graphite sleeve and flake graphite. Registered capital of 500, 000 yuan, the company has 30 employees, covers an area of 10, 000 square meters, with CNC grinding machine, CNC lathe, graphite engraving and milling machine, CNC cutting machine and various types of specifications of lathes and other processing equipment, complete production equipment, strong technical force, good reputation.
Business scope: Graphite and carbon products manufacturing; Sales of graphite and carbon products; Graphite powder processing (excluding mining); Mold manufacturing; Mold sales; Technical service, technology development, technology consultation, technology exchange, technology transfer, technology dissemination; Import and export of goods.
With sincerity as the root, with the letter as the foundation, we will sincerely cooperate with domestic and international customers with sincere confidence, exquisite technology, stable quality and first-class service, and create brilliant future together!